T O P I C R E V I E W |
paulmyers | These (upper control arm?) bushes have perished. Do I just replace these or should I do more while it's in the garage? Thanks!
This message has been edited by paulmyers on 08-03-2017 at 10:50 AM |
ALLEY CAT | http://www.prowleronline.com/ubb/Forum1/HTML/013931.html ^ > here you go,,,,your best option is to buy these from Brian
V V V .
. Use this link to buy VSL: Click here to pay for VSL . Click here to pay for VSL or send money via paypal to b_richardson@yahoo.com Send me an email if you would like to send me a check .
This message has been edited by ALLEY CAT on 08-03-2017 at 12:12 PM |
padroo | It looks like you need to have the whole suspension inspected and have an itemized list of what needs replaced with a cost of the needed repairs. JMO |
paulmyers | I'm not going to replace the arms and ship them to Europe for these little bits of rotten rubber. Does any one know the size, there must be some polyethylene bushes out there that'll fit. |
robin | http://www.prowleronline.com/ubb/Forum6/HTML/011183.html Set for sale oem |
robin | Prowler store has OEM and Brian R Sit down for sale 359.00 a pair! Call the cops I think someone is getting ripped off This message has been edited by robin on 08-15-2017 at 04:17 PM |
paulmyers | What happened to this forum? Did everyone retire |
padroo | As a matter of fact I am retired. I thought we gave you all the answers except for you wanting to know about replacing the bushings. I have never heard of anyone doing that. The choices the way I see it is to buy new ones from Brian Richardson (Spoons), replace your old ones with new ones, some people have made covers to go over the outer part to keep dirt out and grease in, and the last choice is leave them alone. I believe there are nylon busing inside and what you are looking at is the badly deteriorated covers. If you remove one you can clean it up and see if there is any play in it. It there isn't you can leave it alone or pack some fresh grease in it and make some kind of a cover. Here is what the preferred method looks like. installed. I am going to have to reprimand my wife for not getting those water spots removed in the above picture. This message has been edited by padroo on 08-17-2017 at 07:24 PM |
robin | http://www.prowleronline.com/ubb/Forum9/HTML/003431.html |